BRAX MATRIX MX4 AMFİ

  • 30.825,00 ₺


Etiketler: BRAX MATRIX MX4 AMFİ

  • Optical digital inputs used for the upcoming BRAX DSP (2 x Toslink)
  • Separate terminal for connecting a BRAX Power Stabilizer directly to the switching transistors
  • Eight capacitors (with a total capacity of 40,000 microFarad) take care of an extremly high current impulse load
  • 200 Ampere high-performance switching transistors
  • Interference-free power supply due to optimized suppression coil up to 300 Ampere with ultra-low internal resistance
  • Especially developed transformers with highly-efficient core materials guarantee a total performance of more than 1,800 Watts
  • High efficiency due to super-fast Schottky power diodes with more than 160 Ampere in total
  • Below the lateral PC-boards there are in total 32 hand-selected high-end MOSFET transistors which account for brilliant sound
  • Processor controlled operating data management of the amplifier and power supply. It also controls the optional fan. Furthermore the processor is supervising the whole amplifier and shuts it down in case of malfunctions
  • Engraved serial number on the stainless steel plate
  • Impedance independed output power of around 280 Watts per channel
  • 4-, 2- and 1-Ohms stable
  • Optional fan at the bottom plate with porcessor supported fan control
  • The solid heatsink, made of a special aluminium alloy takes care of a perfect cooling of power supply transistors and those of the amplifier


Output power RMS 
- @ 4 Ohms4 x 275 Watts
- @ 2 Ohms4 x 280 Watts
- @ 1 Ohm4 x 285 Watts
- bridged @ 4 Ohms2 x 550 Watts
- bridged @ 2 Ohms2 x 560 Watts
Amplifier technologyClass AB
Inputs4 x Cinch
2 x Optical SPDIF (12 - 96 kHz) 
1 x Remote In
Input sensitivityRCA / Cinch 1.0 - 8.0 Volts
Input impedance RCA / Cinch10 kOhms
Input impedance highlevel
Outputs4 x Speaker output
Output voltage RCA / Cinch
Signal converter for digital inputBurrBrown 24 Bit DA converter
Frequency response10 Hz - 80 kHz
Bass boost
Highpass
Lowpass
Bandpass
Subsonic
Phase
Slope high- / lowpass
Slope subsonic / lowpass
Signal-to-noise ratio digital input> 110 dB (A-weighted)
Signal-to-noise ratio analog input> 110 dB (A-weighted)
Distortion (THD)< 0.001 %
Damping factor> 1000
Operating voltage9 - 16 Volts
Idle current8.5 A
Fuse6 x 25 A LP-Mini-fuse (APS)
Additional featuresColour Protection System, BRAX Power Stabilizer connector
Dimensions (H x W x D)79 x 360 x 360 mm / 
3.11 x 14.17 x 14.17"
Net weight11.5 kg

Yorum Yap

Yorum Yap

Not: HTML'e dönüştürülmez!
    Kötü           İyi